Posted on

NEW ARRIVAL — 1/48 USAAF 4.5-inch M8 Barrage Rockets (wing-mounted)

AC48087

Mounted on the wing hard points of many USAAF aircraft during the Second World War, these rockets unleashed a formidable barrage of firepower against a variety of ground targets – convoys, tanks, buildings, etc.  Any P-47 or P-51 could be modified to become a fighter/bomber/strafer with these mounted under their wings!  These also saw use by the A-20 Havoc crews in Europe (6 rocket tubes per wing!).

This set comes complete with the parts needed to build 6 rocket tubes (3 under each wing).  Each part is meticulously crafted and designed to meet the most demanding modeling need.

Available for purchase for only $7.99 (plus shipping) by clicking HERE

Instructions included

Great for the intermediate through advanced modeler – not intended for modelers under the age of 13.

Made in the USA.

Posted on

NEW ARRIVAL – 1/32 USAAF Radio Receiver and Transmitter Interior Detail Set

AC32030

Pick up a set of these radio transmitters and receivers for your WWII USAAF aircraft or diorama!  Detailed right down to the most minute knob and dial, you will not be disappointed with overall value, detail and craftsmanship!

These were seen inside many USAAF aircraft – and will add greatly to the realism and overall appearance of visible spaces with your model.

Available for purchase for only $7.99 (plus shipping) by clicking HERE!

Intended for the beginner through advanced modeler

Not intended for modelers under the age of 13.
Made in USA.

Posted on

NEW RELEASE: 1/48 USAAF Radio Receiver and Transmitter detail set and upgrade!

AC48089

Pick up a set of these radio transmitters and receivers for your WWII USAAF aircraft or diorama!  Detailed right down to the most minute knob and dial, you will not be disappointed with overall value, detail and craftsmanship!

These were seen in many USAAF aircraft – and will add greatly to the realism and overall appearance of visible spaces with your model.

Intended for the beginner through advanced modeler

Available for purchase for only $6.99 (plus shipping) HERE!

Not intended for modelers under the age of 13.
Made in USA.

Posted on

NEW RELEASE: AC32029 – B-17 Seats with Cushions (no belts) For HK Kit

AC32029
Want to add some visual impact to your HK flying fortress without the fuss or monetary outlay?  R2D is offering the seat without seat belts too!

The seat is intricately designed (of course!) —  accurate to the most minute detail including rivets, anchors, etc.!  The cushions feature subtle fabric wrinkling/creasing and texture[click HERE to purchase our set with belts!] This set is perfect for the modeler who already owns PE/fabric seat belts or prefers PE and/or Fabric belts over molded-on belts.

Note, the actual 1:1 seats also had frames or supports that raised them above the lower fuselage surface — these are not included in this update set — only the seats themselves.  Future releases will include support structures for an additional fee.

You can use these seats in conjunction with the seat supports provided by HK in their kit(s).

  • Set comes with 2 highly detailed seats without belts

Available now for only $9.99 USD per set before shipping – click HERE to purchase today!

Not intended for modelers under the age of 13.

Made in USA.

Posted on

NEW RELEASE – AC32028 Intricately Designed 1/32 B-17 Pressed Steel Seat Shells

AC32028
Want to add some visual impact to your HK flying fortress without the fuss or monetary outlay?  R2D is offering the seat without seat belts or cushions — just the steel shell!

The pressed-metal is shell faithfully recreated in resin, and is intricately designed (of course!) —  accurate to the most minute detail including rivets, anchors, etc.! [click HERE to purchase our set with belts!] This is perfect for the modeler who already owns PE/fabric seat belts or prefers PE and/or Fabric belts over molded-on belts or who is doing a diorama.

Note, the actual 1:1 seats also had frames or supports that raised them above the lower fuselage surface — these are not included in this update set — only the seats themselves.  Future releases will include support structures for an additional fee.

You can use these seats in conjunction with the seat supports provided by HK in their kit(s).

  • Set comes with 2 highly detailed seats without belt or cushion detail – but there is loads of detail on the pressed-metal shell — take a look at the pics!!

Available for purchase for only $9.99 plus shipping — click HERE!

Not intended for modelers under the age of 13.

Made in USA.

Posted on

NEW RELEASE – AC48086 – B-17 Pilot/Co-Pilot Seats [NO BELTS]

AC48086
Want to add some visual impact to your Monogram flying fortress without the fuss or monetary outlay?  R2D is offering the seat without seat belts, intricately designed and accurate to the most minute detail including accurate wrinkling/creasing! [click HERE to purchase our set with belts!] This is perfect for the modeler who already owns PE/fabric seat belts or prefers PE and/or Fabric belts over molded-on belts.

Note, the actual 1:1 seats also had frames or supports that raised them above the lower fuselage surface — these are not included in this update set — only the seats themselves.  Future releases will include support structures for an additional fee.

You can use these seats in conjunction with the seat supports provided by Monogram in the kit(s).

  • Set comes with 2 highly detailed seats with cushion detail [Again, no molded-in belts on this set]

Available for purchase for only $8.99 USD for the set of 2 — click HERE to purchase!

Not intended for modelers under the age of 13.

Made in USA.

Posted on

NEW RELEASE – AC72023 75-GAL USAAF NAPALM TANKS

These accessories are a must-have if you are building a 1/72 USAAF Pacific Theater fighter — these are unique and will be sure to make your P-51 or P-47 stand out!  Typically, these were paired with M40 Parafrag bombs on side-by-side pylons.  (1/72 Parafrags are available HERE).

Set comes with 2x 1/72 USAAF tanks, complete with delicate weld seams and joints, as seen on the real thing!  An oil wash would make all of the detail pop! Supports were thoughtfully designed to facilitate the easiest clean-up possible, given its oblong shape.

Available for only $4.99 USD – value, the RESIN2detail way!

Click HERE to purchase!

Perfect for the beginner through advanced modeler.

Not intended for modelers under the age of 13.

Made in USA.