Posted on

Coming Soon from RESIN2detail – more Upgrades for your Mongram B-29!

Coming soon – more releases for the Monogram B-29 Kit over the next month! Stay tuned for more info.

48095 – B-29 Main Gear Door upgrade SET (4 doors). Expected MSRP: $6.99.

48096 – B-29 Cowl Correction (4 cowls) with corrected intake scoop shape and separate cowl cooling flaps. Expected MSRP: $32.00 USD.

Again, more on the way 🙂

Cheers!

Posted on

NEW RELEASE: B-29 Superfortress SET of 4 – R-3350 Engine Upgrades

AC48097

One of the areas of the model that are very hard to convincingly replicate in injection molded plastic are img_1810the radial engines. They lack depth and are very hard to make truly eye-catching.  That’s where RESIN2detail comes to the rescue!

Try out our new set of 4 Wright R-3350 Duplex Cyclone engine fronts on your Monogram™ Superfortress — simply remove the engine from the sprue and mate to the kit bulkhead, or a styrene card bulkhead.  Then add the pushrods to the sides of each cylinder (included). A coat of primer, gray/aluminum finish and some oil weathering and — boom 🙂

Affordably priced at just $24.99 for the set!

Click HERE to purchase!

Intended for the intermediate to advanced modeler – requires modifications to the kit bulkhead and/or nacelle.  Prior experience with resin details will be helpful, but not required. Not intended for use by modelers under 13.
Made in USA

Posted on

NEW RELEASE: 1/48 B-29 Superfortress Exhaust and Supercharger UPDATE Set

AC48100

fullsizerender-2Kick it up a notch with this set of 8 supercharger/exhaust replacements (4 right-side and 4 left-side), with full compartment which includes the supercharger(s), exhaust stack(s), wire(s), etc.  Also included, are 8 supercharger panels to close up the compartment(s) if you so choose.  This set will upgrade all four engine nacelles on your Superfortress model!

One of the areas of the Monogram™ kit that needs attention, is the area on the nacelle sides with the Supercharger and Exhaust access panel and stacks.  The kit’s representation is inaccurate and shallow profile-wise. Ours are super detailed and designed using state-of-the-art 3D scanning technology to ensure a precise fit with the kit nacelles.

Remove supercharger sections from side of kit engine nacelle and replace with the Update Set pieces. Use gap-filling CA glue or epoxy putty to fill seams.
Get yours today by clicking HERE!

Posted on

NEW RELEASE: 1/48 B-29 Superfortress Main and Nose Wheel Upgrade Set

AC48094

If you are building any aircraft model, the wheels are without a doubt one of the most visible and looked at areas.  Luckily, they are also one of the easiest and cost-effective areas to upgrade as well!

Introducing RESIN2detail’s B-29 Superfortress wheel SUPER detail set.  This set contains 16 pieces, including separate wheel hubs, so you can make a highly accurate and realistic representation of both the Main Wheel and the Nose Wheel areas.  Look closely at the photos, and you will see R2D’s trademark attention to detail and finesse.

Available HERE for only $13.99 per set!

Due to the number of pieces, so of which are fragile, we recommend having some model building experience prior to attempting.  Prior experience working with resin upgrade sets helpful.

Struts shown for illustrative purposes only and are not included.

Not intended for children under the age of 13.
Made in USA.

Posted on

NEW RELEASE – A-20 Havoc Super-detailed Seat Replacement SET

AC48104

seat_compare_finalOk, it’s time to toss the kit seats into the spares bin, and replace it with our ultra-detailed and realistic replacement set, replete with belt detail, buckles, rivets – you name it.  The cockpit in the Havoc is a highly-visible area, so it is important to make a big impact here – this seat set will give your model that “wow” factor for sure.

Priced at only $7.49 USD  per set, you can’t go wrong!

Click HERE to purchase from the R2D Store

Posted on

NEW RELEASE — 1/32 USAAF Portable Oxygen Tanks

img_1723-1If you want to take your 1/32 USAAF aircraft interior to the next level, consider purchasing one, or two, or a few of our premium Portable Oxygen Bottle Upgrade SETs — affordably priced at only $5.49 per set in 1/32!

These are very small and delicate, yet highly detailed — once in place, they will not only have saved you an hour or more of time, but also added a level of finesse that is very hard to replicate using styrene rod.  The kit sidewalls may have the occasional molded-in tank, however – these are very shallow and lifeless.

The RESIN2detail sets are full 3D — glue in place, then add weathering and shading and you will have the ultimate realism that you have been craving!

Purchase for only $5.49 USD per set plus shipping by clicking HERE!

Posted on

NEW RELEASE – 1/48 USAAF Portable Oxygen Tanks

img_1716

AC48093

If you want to take your USAAF bomber aircraft interior to the next level, consider purchasing one, or two, or a few of our premium Portable Oxygen Bottle Upgrade SETs — affordably priced at only $4.99 per set in 1/48!

These are very small and delicate, yet highly detailed — once in place, they will not only have saved you an hour or more of time, but also added a level of finesse that is very hard to replicate using styrene rod.  The kit sidewalls may have the occasional molded-in tank, however – these are very shallow and lifeless.

The RESIN2detail sets are full 3D — glue in place, then add weathering and shading and you will have the ultimate realism that you have been craving!

Purchase HERE for only $4.99 USD per set, plus shipping!