The inside of modern jet intakes has always been a tough area to clean up and make realistic — if you are hitting modeler’s block and need a morale boost, or if you want to depict a different look for your Frogfoot, check out these new FOB covers!
Set includes 2 covers for Front Intake and 2 covers for Exhaust Nozzle.
Delicately and intricately designed (note – realistic stressed skin, handles, etc.!) and cast in a light-gray resin, R2D’s FOB covers are the perfect way (and easiest way) to creatively close off the otherwise bland and difficult-to-detail air intake area of the Frogfoot! These puppies drop fit right into the kit’s opening and only require very light clean-up and sanding to contour perfectly to the kit — see pics in the gallery.
Modeler’s note – these were typically painted in a bright red color.
Affordably priced at only $5.99 per set!
Click HERE to purchase!
If you are contemplating the Monogram™ B-29 Superfortress kit, you will want to take a look at these affordable drop-fit upgrades! The kit, while very good in its own right(especially given the age of the kit) is in need of help in certain areas to bring it up to 21st century standards.
These replacement main gear doors provide subtle skin stressing, and sublime rivet detail that will kick up the undercarriage a notch.
Set includes 4 doors – two right-side doors, and two left-side doors.
Available now, for only $6.99 per set
Click HERE to purchase directly from our store!
For those looking to construct a 1/48 USAAF airfield diorama, you must take a close look at R2D’s latest offering. The Weaver bomb lift is quintessential to the WWII US airfield experience – you see them in dozens of wartime photographs! Pose with an M5 bomb cart, M6 Truck or scale figures!
This exquisitely detailed little lift features 10 highly-detailed parts and full instruction guide. The swivel handle is fully poseable in the “at use” or “rest” positions. With minimal work, the lift can be lowered into the un-raised position.
Perfect for use with the Monogram™ B-17, B-24, B-26, B-25, A-20 and many others.
Available today for only $10.99 per set, by clicking HERE!
The wait is over! For those looking to construct a 1/32 USAAF airfield diorama, you must take a close look at R2D’s latest offering. This exquisitely detailed little lift features 10 highly-detailed parts and full instruction guide. The swivel handle is fully poseable in the “at use” or “rest” positions. With minimal work, the lift can be lowered into the un-raised position.
Perfect for use with the HK B-17 model(s) and the B-25, among others.
Available today for only $14.99 per set by clicking HERE!
If you are contemplating building a 1/72 B-17, the newly released Airfix kit for instance, you will want to pick up a set of these wooden ammo boxes for near the Waist Gunner positions — intricately detailed with ribbing, and ammo shoots it is faithful to the originals in every way.
It even comes with replacement K-6 late-model gun mounts that you can use with our Fast Fix 1/72 0.50 cal replacement set.
Affordably priced at just $4.99 per set — pick one up HERE!
Coming soon – more releases for the Monogram B-29 Kit over the next month! Stay tuned for more info.
48095 – B-29 Main Gear Door upgrade SET (4 doors). Expected MSRP: $6.99.
48096 – B-29 Cowl Correction (4 cowls) with corrected intake scoop shape and separate cowl cooling flaps. Expected MSRP: $32.00 USD.
Again, more on the way 🙂
Just visit our online store (link, below) and add items totaling at least 15% (excluding shipping) to your cart – during checkout, you can add in the coupon code: BLACKFRIDAY to take advantage of the deal!
One of the areas of the model that are very hard to convincingly replicate in injection molded plastic are the radial engines. They lack depth and are very hard to make truly eye-catching. That’s where RESIN2detail comes to the rescue!
Try out our new set of 4 Wright R-3350 Duplex Cyclone engine fronts on your Monogram™ Superfortress — simply remove the engine from the sprue and mate to the kit bulkhead, or a styrene card bulkhead. Then add the pushrods to the sides of each cylinder (included). A coat of primer, gray/aluminum finish and some oil weathering and — boom 🙂
Affordably priced at just $24.99 for the set!
Click HERE to purchase!
Intended for the intermediate to advanced modeler – requires modifications to the kit bulkhead and/or nacelle. Prior experience with resin details will be helpful, but not required. Not intended for use by modelers under 13.
Made in USA
Kick it up a notch with this set of 8 supercharger/exhaust replacements (4 right-side and 4 left-side), with full compartment which includes the supercharger(s), exhaust stack(s), wire(s), etc. Also included, are 8 supercharger panels to close up the compartment(s) if you so choose. This set will upgrade all four engine nacelles on your Superfortress model!
One of the areas of the Monogram™ kit that needs attention, is the area on the nacelle sides with the Supercharger and Exhaust access panel and stacks. The kit’s representation is inaccurate and shallow profile-wise. Ours are super detailed and designed using state-of-the-art 3D scanning technology to ensure a precise fit with the kit nacelles.
Remove supercharger sections from side of kit engine nacelle and replace with the Update Set pieces. Use gap-filling CA glue or epoxy putty to fill seams.
Get yours today by clicking HERE!
If you are building any aircraft model, the wheels are without a doubt one of the most visible and looked at areas. Luckily, they are also one of the easiest and cost-effective areas to upgrade as well!
Introducing RESIN2detail’s B-29 Superfortress wheel SUPER detail set. This set contains 16 pieces, including separate wheel hubs, so you can make a highly accurate and realistic representation of both the Main Wheel and the Nose Wheel areas. Look closely at the photos, and you will see R2D’s trademark attention to detail and finesse.
Available HERE for only $13.99 per set!
Due to the number of pieces, so of which are fragile, we recommend having some model building experience prior to attempting. Prior experience working with resin upgrade sets helpful.
Struts shown for illustrative purposes only and are not included.
Not intended for children under the age of 13.
Made in USA.